Skip to content

AERILIS / USER GUIDE / V1.0.0

Installation.
Connectivity.

WINDOWS SETUP / FIREWALL / CONNECTED SCREENS

Set up AERILIS SIMULATION and connect your flight instruments to the screens around you, step by step.

Designed for first-time users, with a focus on safe local network access.

Your setup. Your screens. Your cockpit.

INSTALLATION / CONNECTIVITY / WINDOWS

Get connected.
Stay in control.

AERILIS SIMULATION 1.0.0 — installation and local network guide.

This guide explains how to start AERILIS and connect your own screens safely. The official installer is not yet available for public download.

How do I install AERILIS on Windows?

AERILIS 1.0.0 is designed for compatible 64-bit Windows 10 and Windows 11 PCs.

  1. When released, download the official installer from aerilis.com.
  2. Run AERILIS-Setup-x64.exe.
  3. Follow the on-screen installation steps.
  4. Open AERILIS from the Start menu or desktop shortcut.
  5. Click START to launch AERILIS ENGINE.
  6. Select LAUNCH ON THIS PC to open the FLIGHT DECK on your computer.
  7. Select LAUNCH ON DISPLAY to connect an iPad, iPhone or another screen.

The installer is designed for per-user installation without requesting administrator elevation. Windows security settings and managed workplace policies may still restrict installation or network access.

Why does Windows ask for firewall permission?

Windows may ask whether to allow AERILIS-EngineProbe.exe to communicate through Windows Defender Firewall when AERILIS ENGINE starts for the first time. This enables devices on your trusted local network to reach the engine.

  1. Select Private networks only.
  2. Leave Public networks unchecked.
  3. Click Allow.

Keep the firewall enabled. Never expose the AERILIS Engine to the Internet or configure port forwarding on your router. This firewall prompt is different from a Windows administrator (UAC) prompt; workplace policies may still require administrator approval.

My iPhone or iPad cannot connect. What should I do?

During testing, a second Windows PC was using a Public network profile while the firewall permission applied only to Private networks. This prevented the mobile connection.

  1. Confirm your Windows PC and mobile device are on the same trusted local network.
  2. Open Windows Settings.
  3. Go to Network & Internet.
  4. Select Wi-Fi or Ethernet, depending on your connection.
  5. Open the properties of the active network.
  6. Choose Private network only if this is your home network or another network you trust.
  7. Return to AERILIS.
  8. Open LAUNCH ON DISPLAY.
  9. Scan the newly displayed QR code within its 60-second validity period.
  10. Check that the FLIGHT DECK opens on your device.

Never change an untrusted public network to Private just to make AERILIS work. Guest Wi-Fi networks may isolate devices even when they use the same router.

Can I use AERILIS without Microsoft Flight Simulator?

Yes. The Control Center, local engine and FLIGHT DECK can start without Microsoft Flight Simulator 2024. Without a connected simulator, the instruments receive no live flight telemetry and the MSFS status remains disconnected.

Does AERILIS require an Internet connection?

Internet access is needed to download the official installer when it becomes available. Communication between AERILIS ENGINE and your connected screens uses your local network. Complete offline operation of every dependency has not yet been validated.

Is AERILIS accessible from the Internet?

No. AERILIS 1.0.0 is designed to operate on a trusted private local network. The engine uses local HTTP and WebSocket connections, which are not encrypted. Never expose the engine to the public Internet, disable your firewall, or configure router port forwarding.

CONNECTION TROUBLESHOOTING

Having trouble connecting your display? Follow these steps in order.

  1. Check the AERILIS Engine. Open the Control Center and make sure AERILIS ENGINE is running.
  2. Check your local connection. Verify that the Flight Deck opens locally on your PC.
  3. Check your network. Make sure your PC and display are connected to the same trusted local network. Avoid guest networks and VPN connections.
  4. Connect your display again. Use a fresh LAUNCH ON DISPLAY QR code. Avoid expired or previously saved codes.
  5. Check simulator connectivity. If the Flight Deck opens but instruments are not updating, verify that MSFS 2024 is running and connected to AERILIS.
  6. Check Windows Firewall. Ensure AERILIS is allowed on Private networks. Keep Public networks disabled.
  7. Still having trouble? Contact AERILIS Support and describe what happens when you try to connect.